Skip to main content

Specific Dangers in Concrete Cutting Sydney Methods

Work safety when concrete cutting Sydney or performing similar method is a priority for every employee as well as the employer. Even the client where the workers need to cut the concrete does not want to deal with these dangers.

The principal responsibility of every employer is to develop safety procedures for cutting, drilling or sawing a concrete. Each method that involves cutting or drilling concrete is associated with specific dangers.

Dust and fibres
Although concrete saws and tools have dust protection ventilation systems, the worker needs a respirator if he uses tools for a more prolonged period of time. The greatest danger from dust is silicosis - a chronic illness that causes coughing, difficulty breathing and chest pain. It takes several years for the first symptoms of the disease to occur, so the worker is unaware of the danger lurking. The risk of the disease is associated with the amount of inhaled dust. The employer should provide sufficient protective equipment, especially when dry concrete cutting or when the blades are damaged.

Noise
The worker's hearing ability is compromised if sufficient measures are not taken to protect him. This superior ability may be damaged in two ways: if the worker is exposed to very loud noise in a short time, or if the worker is exposed to a low noise level for an extended period. Before his employment, the worker should know that concrete cutting and drilling equipment causes some level of noise and that he will be exposed to it daily. The employer needs to provide training and instruction on the effects of noise, as well as to provide hearing protectors and other proper equipment.

Electricity
The risk of electrocution is high if there is pooled water at the working place. Before using any electrical equipment, this water must be vacuum-cleaned. A trained worker will know he must not use electrical equipment for wet concrete cutting. This method requires only hydraulic, pneumatic or petrol engine powered equipment. Complete electrical equipment used for concrete cutting at the construction site is inspected by a qualified person.

Kick-Back
Kick-back is an unexpected situation when the blade violently escapes from the cutting surface. Workers who operate hand-held tools are the ones who face the greatest risk of this hazard. The worker faces potential injuries such as fractures, cuts and bruises. This danger can occur when changing the blade direction without removing it off the wall, encountering cables and pipes, cutting unstable surfaces.



The dangers of concrete cutting Sydney can be reduced by proper training of workers and wearing protective equipment. Only experienced workers can manage the required equipment and tools to cut concrete.

Comments

Popular posts from this blog

Concrete Cutting Sydney – Dry vs. Wet

 There are many types of concrete cutting, but diamond cutting using a diamond saw blade is considered one of the most efficient techniques. This is because it offers less fracture to cutting surfaces and cleaner overall cuts. There are two primary techniques for diamond cutting: dry and wet.  Concrete cutting Sydney uses both of these methods depending on the project. Both techniques are very efficient and offer high-quality cuts, but they have certain differences. Read on to learn each technique's pros and cons to determine which is the right choice for your specific project. Dry Concrete Cutting Dry concrete cutting, as the name suggests, does not use water. This technique is typically handheld, and it is used intermittently. Following are the advantages of dry concrete cutting: •    No water source is needed on site. •    No electrical hazards from water coming into direct contact with equipment used for cutting concrete. •    I...

The Long-Term Benefits of Concrete Grinding Sydney

Concrete is one of the most versatile and durable building materials available, but over time, it can develop imperfections, wear down, or require refinishing for a variety of reasons. This is where concrete grinding in Sydney comes into play.  Whether you're looking to restore an old concrete surface, prepare it for new flooring, or give it a polished, decorative finish, concrete grinding can provide the solution.  Key Purposes of Concrete Grinding Surface Preparation One of the most common uses of concrete grinding is surface preparation. Before installing new flooring, coatings, or tiles, it's essential to have a clean and smooth surface. Concrete grinding is an effective way to remove old flooring materials, adhesives, paint, and other residues that can interfere with new installations. Grinding helps to create a level, clean surface that ensures a strong bond between the new flooring and the underlying concrete. Without proper surface preparation, new flooring materials m...

Visiting Pawn Broker Bankstown for Pre-Holiday Shopping

Interest for pawn broker Bankstown is particularly increasing as the Christmas and New year's euphoria approaches. Two equally important reasons contribute to this fact. Festive mood leads to festive shopping. Every individual wants to buy a unique gift for the closest and most loved ones, regardless of whether they are buying for their children, spouse, parents, friends or colleagues. December is special because it is time to buy some holiday gifts. Nowadays, people feel comfortable buying items from pawn shops. So the period before the holidays is quite popular with both, brokers and customers. This month, pawn shops offer special sales and additional discounts for the customers. Before the holiday euphoria, people increase their attendance in these shops, mainly because of two factors. First, people are becoming more aware that they can buy electronic appliances, antiques and a variety of jewellery at a much lower price, rather than buying new ones in expensive stores. Secon...